1.If the photo comes out strangely(Photos are taken differently: inverted, cropped, black and white, etc.)
- In the settings on the AF program, click Select Scan and set it to WIA-Epson Perfection.
2. If you're not aware of it and you're asked to connect the device
– If the model does not have a power button, unplug the USB cable and reconnect after 10 seconds run the back program again.
> Take the 5-pin cable connected to the AF, reconnect it after 10 seconds, and then program it run again.
– If you are a model with a power button, press the button for more than 7 seconds to exit after a while, turn it back on and check the recognition.
> Unplug the two cables connected to the AF itself, reconnect and power on after 10 seconds turn on.
3. If it is recognized and does not work
- Unplug the two cables connected to the AF itself and reconnect after 10 seconds and power on turn on.
> Delete the drive, reboot and reinstall it.
※ This article is automatically translated by Yandex Translate.
English 
Korean